Architecture, art & interiors
Stone is a design material again
Design-driven forms in genuine stone from local quarry and no cement. Strong, resilient, non-combustible and sustainable.
Freedom
You decide what is possible!
Façades, panels, structural components, and more. Tell us what your next creation will be.
Printed stone panels for façades and feature walls. Relief, perforations and fixings come out of the printer, and every panel can be different.
- Every panel can differ
- No mould, so variety costs nothing extra.
- Built-in details
- Anchors, ducts and joints are printed into the panel, ready for the substructure.
- Made for outside
- No strength loss after freeze–thaw. Non-combustible. High thermal mass.
- Your finish
- As printed, sandblasted, milled or polished.
Steps and whole staircases in stone, straight, spiral or freeform, printed in elements, ready to assemble.
- Freeform
- Curved stringers, cantilevered steps and twisting forms, without formwork.
- Lighter than solid stone
- Hollow shells 6 to 8 cm thick, filled or post-tensioned where needed.
- Fixings built in
- Anchors for handrails and connections are part of the print.
Printed stone that stays outside all year, in public space, gardens and on buildings.
- Through the winter
- No strength loss after freeze–thaw testing.
- Nothing to degrade
- No resin and no plastic, only mineral aggregate and a geopolymer binder.
- Freeform
- Adatped to the landscape.
- Versatile
- Made in pieces, it can be assembled and disassembled with ease.
Your application?
Tell us what you would make in printed stone
Working together
From your model to finished stone
Every project is quoted from your model.
- 01
Your sketch or model
Send us a sketch, drawings or a 3D model. A finished model is not needed to start.
- 02
Made for printing
We check it with you and optimize it for printing if needed.
- 03
Samples and a prototype
Samples of the material and finish, then a first piece to see and touch.
- 04
Printing and finishing
Every element printed and finished in our workshop.
- 05
Delivered
Every element delivered to your site, numbered and ready for your contractor.
Precision
Every material, every finish
The sand sets the colour and the grain; the finish sets how the surface feels and catches the light. See them in your hands. We send samples on request.
Sustainability
Made from what is already there
The stone comes from what quarries and building sites leave behind, close to where it will stand. No cement, low carbon, fully circular.
Local material
Any sand, demolition rubble or brick dust. We can work with local quarries and produce on site.
No cement
A geopolymer binder, cured at room temperature, with no kiln.
Only where it is needed
Hollow shells and lattices, printed to the load, instead of solid blocks cut down.
Back into the printer
If a piece is no longer needed, it can be crushed and printed again.
Performance
Strong enough to build with
Tested by an independent accredited laboratory.
- 37 MPa
- Mean compressive strength, in an independent accredited test
- No loss
- of strength after freeze–thaw testing
- Fire resistant
- Non-combustible and insulating, with no resin and no cement
Every project is approved on its own. We provide the test data and work with the project engineer.
Proof
What we have built
- Anti-RuinVenice, Biennale Architettura · 2025
From Thames to EternityLondon, St Paul’s Cathedral · 2026
StoneXNew Delhi, India · 2026
1,311 DiamondsApeldoorn, Paleis Het Loo · 2026
Anti-Ruin, Phase 2London, Royal Academy of Arts · 2026
Artefacts of the FutureAthens, Stavros Niarchos Foundation · 2026
Ceci n’est pas un fossileVerona, Marmomac · 2024
Arzo – Funicular floor prototypeArzo, Ticino · Palazzo Mora, Venice · 2023
Interiors
Designed for the rooms you build
Lighting and furniture in printed stone, from our designers, ready to print in the stone and finish you choose.
Do I need a finished 3D model?
No. A sketch or drawings are enough to start. We develop the printable geometry with you, with its joints, fixings, cavities and channels.
Is it really stone?
Yes. Quarry fines, demolition rubble or brick dust, bound by a geopolymer instead of cement. It contains no resin and no plastic, and it does not burn.
Can it stand outside?
Yes. It shows no strength loss after freeze–thaw testing. From Thames to Eternity stands outside St Paul’s Cathedral in London.
Will it be approved for my building?
Every project is approved on its own. We provide the test data from an independent accredited laboratory and work with your engineer.
Can I see and touch it first?
Yes. Order a set of samples, one piece printed in up to three finishes in the material you choose, and we ship it to you.
What does it cost?
Every project is quoted from your model, and the first consultation and the quote are free. The price follows the volume of stone and the finish, not the complexity of the shape.
How long does it take?
It depends on the volume. You get a timeline with the quote, and samples come before the series.
Have a design that’s hard to build?
Send us the model and where it will stand. We reply within a few working days.